Cobra Road Scout Road Scout Manual - Page 3
Installation - mount
View all Cobra Road Scout manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Installation Your new Road Scout comes with our latest EZ Mag Mount™. Simply slide the Road Scout onto the mounting bracket fully and that's it. To remove the Road Scout from the mount, simply pull the device off the mount. Mounting Tips: • Center of windshield between driver and passenger. • Ensure clear view of road ahead and sky above. • Avoid windshield wipers and heavily tinted areas. To mount the Road Scout in your vehicle: 1 Remove backing from EZ Mag Mount. 2 Firmly press EZ Mag Mount onto windshield and flip locking clamp to secure. 3 Tilt the display end of the Road Scout slightly upward and engage with the mounting bracket. The EZ Mag Mount™ magnet holds the device firmly in place. 4 To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb wheel to secure. 5 To remove the Road Scout, simply lift the display end of the detector upward. The device will release from the mount. 6 To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount. EZ Mag Mount Care Instructions: To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow to air dry. 3