Cobra XRS 9370 XRS9370_MANL - Page 5

Your Detector Installation Dashboard Mounting 1. Place the detector on the dashboard to find a location where the unit has a clear, level view of the road. The angle can NOT be adjusted after mounting. 2. Remove the paper backing from one side of the hookand-loop fastener. 3. Attach the pad to the dashboard at your chosen location and remove the other paper backing. 4. Attach the detector to the hook-and-loop fastener. You can remove and reattach the unit as often as you like. 6. Plug the power cord into the detector. 7. Plug the cigarette lighter adapter on the power cord into your vehicle's cigarette lighter. 4 English Your Detector Getting Started Getting Started • Power On h X K Ka V S On-Off/ Volume Control Rotate clockwise (away from you) To Turn On the Unit and Adjust the Audio Volume Rotate the On-Off/ Volume control clockwise (away from you). Tone Three beeps Visual Display h appears in the display indicating that the power is On NOTE In some vehicles, power is supplied to the cigarette lighter even while the ignition is Off. If this is the case with your vehicle, you should turn Off or unplug your detector when parking for lengthy periods. Auxiliary Audio Jack • The Auxiliary Audio Jack can be used to connect external speakers in environments with high ambient noise levels. The internal speaker will be disconnected. (This uses a mini stereo audio connector.) Auxiliary Audio Jack Nothing Comes Close to a Cobra® 5