Cobra XRS 9370 XRS9370_MANL - Page 7
Settings - radar
View all Cobra XRS 9370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Your Detector Settings Muting an Alert Your detector allows you to quickly turn Off an audio Alert by momentarily pressing the Mute button. If you press the Mute button a second time during the Alert, the audio Alert will be turned back on. Auto Mute Mode Auto Mute will automatically reduce the audio volume of all alerts after four seconds for as long as the signal is detected. The factory setting for Auto Mute is on. Mute Button Press and release To Turn Auto Mute On Press and release the Mute button again while no alert is occurring. Tone Two beeps To Turn Auto Mute Off Press and release the Mute button while no alert is occurring. Tone One beep 8 English Visual Display None Visual Display None Your Detector Settings IntelliMute IntelliMute is a unique feature that allows you to avoid alerts you don't need to hear because you are stopped or moving slowly. By sensing the "revs" (RPMs) of your engine, IntelliMute knows when you are at low speed and automatically mutes audio radar alerts. Before IntelliMute will work, you must set an activation point for your engine's revs (see page 10). Whenever the revs are below that point, IntelliMute will begin muting. The activation point will be stored in memory and recalled each time the power is turned on. The factory setting is IntelliMute Off. NOTE IntelliMute may not work with some vehicles because it cannot sense the engine's revs. In such cases, you can reduce unwanted audio alerts by using Auto Mute and City mode when appropriate. To Turn IntelliMute On Press and release the IntelliMute button. Tone Two beeps To Turn IntelliMute Off Press and release the IntelliMute button again. Tone One beep IntelliMute Button Press and release Visual Display Dot appears next to the large character on the right Visual Display None Nothing Comes Close to a Cobra® 9