Cobra XRS 9370 XRS9370_MANL - Page 6

Your Detector Settings Settings • When changing the Settings on your detector, please keep in mind: I Buttons can have multiple functions. I All settings will be stored in memory when the power is turned Off and recalled when the power is turned back On. Highway/City Mode Setting your detector to City mode delays all X band audio alerts until the signal strength reaches Level 3. (A single beep will sound when the signal is first detected.) This will reduce false alerts while you are driving in, or near, urban areas where there are many sources for conflicting X band signals such as microwave towers and automatic door openers. To change settings, follow the procedure listed below, which indicates what you will see and hear as you complete each step. The factory setting is Highway mode. Highway Mode h X K Ka V S City Button Press and release City Mode X K Ka V S c To Change From Highway Mode to City Mode Press and release the City button. Tone One beep Visual Display c appears in the display To Change From City Mode Back to Highway Mode Press and release Tone the City button again. Two beeps Visual Display h appears in the display 6 English Your Detector Settings UltraBright Data Display Brightness You can choose from three settings for Brightness of the display. You can cycle through the settings by repeatedly pushing the Dim button. The factory setting is Bright. Bright Press and Dark release Dim button Dim Dim Button Press and release To Change the Brightness to Dim Press and release the Dim button once. Tone One beep To Change the Brightness to Dark Press and release the Dim button again. Tone One beep To Change the Brightness to Bright Press and release the Dim button a third time. Tone Two beeps Visual Display Display dims Visual Display Display remains dim (no visual alerts will be seen) Visual Display Display returns to full brightness Nothing Comes Close to a Cobra® 7