Cobra XRS 9370 XRS9370_MANL - Page 9

Your Detector Settings IntelliMute Pro IntelliMute Pro prevents detection by radar detector detectors (RDDs) such as VG-2, Spectre I and Spectre IV+ when traveling at slower speeds. It is intended for use by experienced users only. When IntelliMute Pro is turned On, and engine RPMs are below the IntelliMute activation point, your detector's radar detection circuits are turned Off to prevent detection by RDDs. Before IntelliMute Pro can be turned On, you must have turned On and Set the IntelliMute activation point. (See pages 9 through 11.) CAUTION When IntelliMute Pro is On, NO radar signals will be detected and NO alerts will be given at RPMs below the IntelliMute activation point. IntelliMute Button City Button Press and hold both buttons simultaneously IntelliMute Pro On X K Ka V S c To Turn IntelliMute Pro On While no signal is being detected, press and hold both the IntelliMute and City buttons for four seconds. Tone Two beeps Visual Display c or h will blink To Turn IntelliMute Pro Off Press and hold both the IntelliMute and City buttons for four seconds. Tone One beep 12 English Visual Display c or h will show steady Your Detector Settings VG-2 and Spectre I & IV+ Alert Settings Police use radar detector detectors (RDDs) to spot users of radar detectors. Your detector is able to identify signals from VG-2, Spectre I and Spectre IV+ RDDs and can provide alerts when any of these or similar devices are in use near your vehicle. Your detector can be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+ alerts is Off. On/Off Indicator X K Ka V S c Dim Button Press and hold for four seconds To Turn VG-2 and Spectre I & IV+ Alerts On and Off While no signal is being Tone detected, press and hold the Dim button On = Two beeps for four seconds. Off = One beep Visual Display V will blink twice in the display V will blink once in the display Pop Alert The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses a single, short-time pulse to measure the target vehicle's speed. The Pop mode receiver senses Pop singles beyond the effective range of Pop radar guns. As the Pop mode receiver is so sensitive, you should limit the use of Pop Detect mode to highway and rural driving. Pop Alert will alert you to Pop radar signals. During the alert, the unit continues to detect other signals. The factory setting is Pop Detect Off. To Turn Pop Alert On and Off While no signal is being detected, press and hold both the Dim and City buttons for four seconds. Tone Pop On = Two beeps Pop Off = One beep Visual Display P will blink twice in the display P will blink once in the display Nothing Comes Close to a Cobra® 13