Compaq Armada e500 Compaq Armada E500 and Armada V300 Series Maintenance and S - Page 86
Removal and Replacement Preliminaries, 4.1 Tools Required, 4.2 Service Considerations, Plastic Parts
View all Compaq Armada e500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
4 chapter REMOVAL AND REPLACEMENT PRELIMINARIES This chapter provides essential information for proper and safe removal and replacement service. 4.1 Tools Required You will need the following tools to complete the removal and replacement procedures: s Magnetic screwdriver s Torx T-8 screwdriver s Phillips screwdriver (for screw securing diskette drive bezel to base assembly on Armada V300 only) s 7-mm hex socket (for bushing guides) s Tool kit (includes connector removal tool, loopback plugs, and case utility tool) 4.2 Service Considerations Listed below are some of the considerations that you should keep in mind during disassembly and assembly procedures. IMPORTANT: As you remove each subassembly from the computer, place it (and all accompanying screws) away from the work area to prevent damage. Plastic Parts Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Removal and Replacement Preliminaries 4-1