Compaq DL580R01 Service Guide - Page 80
Run Diagnostics. Replace failed, I/O Fan Fan
![]() |
UPC - 720591221416
View all Compaq DL580R01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Diagnostics and Troubleshooting 3-11 Table 3-2 POST Error Messages continued Error Code Audible Beeps 1152-Com Port 2, 3, or 4 Address Assignment Conflict 2 short 1610-Temperature violation detected. Waiting for system to cool 2 short 1611-Fan failure detected 2 short 1611-I/O Fan (Fan X) 2 short failure detected 1611-CPU Fan (Fan X) failure detected 2 short 1612-Primary power 2 short supply failure 1613-Low System None Battery 1615-Power Supply None Failure, Power Supply Unplugged, or Power Supply Fan Failure in Bay X 1617-Fan controller not responding 2 short 1617-I/O Fan controller not responding 2 short 1617-CPU Fan controller not responding 2 short 1618-PCI slots None powered down. Check PCI hot plug enabler connectors. 1620-Locked SCSI None Bus Detected. Verify SCSI bus cabling. System halted. 1621-Current SCSI None bus cable configuration is not recommended Probable Source of Problem Both external and internal serial ports are assigned to COM2, COM3, or COM4. Ambient system temperature too hot Recommended Action Run the System Configuration Utility and correct. Check fan in system environment. Required fan not installed or spinning I/O fan failed CPU fan failed Check fans. Replace the failed fan. Replace the failed fan. Primary power supply has failed. Real-time clock system battery is running low on power. A power supply has failed. Replace power supply as soon as possible. Run Diagnostics. Replace failed assembly as indicated. Replace or check specified power supply. Fan controller failure I/O fan controller failure CPU fan controller failure PCI Hot Plug enabler is missing or failed. Check and replace failed controller assembly. Check and replace failed controller assembly. Check and replace failed controller assembly. Check and replace missing or failed assembly. SCSI bus failure Run Diagnostics. Replace failed assembly as indicated. Improper SCSI bus cabling Check documentation for proper SCSI bus cabling. continued
![](/manual_guide/products/compaq-dl580-service-guide-f3a741b/80.png)