Compaq DL580R01 Service Guide - Page 97

– 1199, Serial Test Error Codes, Modem Communications Test Error Codes, Table 3-9

Page 97 highlights

3-28 Compaq ProLiant DL580 Server Maintenance and Service Guide 1100 - 1199, Serial Test Error Codes The 1100 series of diagnostic error codes identifies failures with serial/parallel interface board or system board functions. Corrective action may require replacement of the serial/parallel interface board or the system board assembly. Table 3-9 Serial Test Error Codes Error Code 1101-XX 1109-XX Description Serial port test failed. Clock register test failed. Recommended Action 1. Check the switch settings on the serial/parallel interface board (if applicable) and retest. 2. Replace the serial/parallel interface board (if applicable) and retest. 3. Replace the system board and retest. 1200 - 1299, Modem Communications Test Error Codes The 1200 series of diagnostic error codes identifies failures with the modem. Corrective action may require replacement of the modem. Table 3-10 Modem Communications Test Error Codes Error Code 1201-XX 1202-XX 1203-XX 1204-XX 1206-XX 1210-XX Description Modem internal loopback test failed. Modem timeout test failed. Modem external termination test failed. Modem auto originate test failed. Dial multifrequency tone test failed. Modem direct connect test failed. Recommended Action 1. Refer to the modem documentation for correct setup procedures and retest. 2. Check the modem line and retest. 3. Replace the modem and retest.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193

3-28
Compaq ProLiant DL580 Server Maintenance and Service Guide
1100
1199, Serial Test Error Codes
The 1100 series of diagnostic error codes identifies failures with serial/parallel interface board
or system board functions. Corrective action may require replacement of the serial/parallel
interface board or the system board assembly.
Table 3-9
Serial Test Error Codes
Error Code
Description
Recommended Action
1101-
XX
Serial port test failed.
1109-
XX
Clock register test failed.
1.
Check the switch settings on the serial/parallel
interface board (if applicable) and retest.
2.
Replace the serial/parallel interface board
(if applicable) and retest.
3.
Replace the system board and retest.
1200
1299, Modem Communications Test Error Codes
The 1200 series of diagnostic error codes identifies failures with the modem. Corrective action
may require replacement of the modem.
Table 3-10
Modem Communications Test Error Codes
Error Code
Description
Recommended Action
1201-
XX
Modem internal loopback test
failed.
1202-
XX
Modem timeout test failed.
1203-
XX
Modem external termination test
failed.
1204-
XX
Modem auto originate test failed.
1206-
XX
Dial multifrequency tone test
failed.
1210-
XX
Modem direct connect test failed.
1.
Refer to the modem documentation for correct
setup procedures and retest.
2.
Check the modem line and retest.
3.
Replace the modem and retest.