Compaq Evo n600c Compaq Evo Notebook N610c and Evo N600c Series Maintenance an - Page 123
Evo Notebook N600c models, Two TM2.5 × 5.0 screws from the Media Bay
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Removal and Replacement Procedures 3. Remove the following screws: ❏ Three TM2.5 × 7.0 screws from the front edge of the base enclosure 1 (Figure 5-21) ❏ Two TM2.5 × 5.0 screws from the hard drive bay 2 ❏ Two TM2.5 × 5.0 screws from the Media Bay 3 ❏ Evo Notebook N600c models-Two TM2.5 × 5.0 screws from the rear panel 4, or ❏ Evo Notebook N610c models-Two TM2.5 × 7.0 screws from the rear panel 4 Figure 5-21. Removing the Top Cover Screws 5-34 Maintenance and Service Guide
5–34
Maintenance and Service Guide
Removal and Replacement Procedures
3. Remove the following screws:
❏
Three TM2.5 × 7.0 screws from the front edge of the base
enclosure
1
(Figure 5-21)
❏
Two TM2.5 × 5.0 screws from the hard drive bay
2
❏
Two TM2.5 × 5.0 screws from the Media Bay
3
❏
Evo Notebook N600c models
—Two TM2.5 × 5.0
screws from the rear panel
4
, or
❏
Evo Notebook N610c models
—Two TM2.5 × 7.0
screws from the rear panel
4
Figure 5-21. Removing the Top Cover Screws