Compaq Evo n600c Compaq Evo Notebook N610c and Evo N600c Series Maintenance an - Page 141
Removing the Processor, When installing the processor, make sure the gold triangle
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Removal and Replacement Procedures 3. Insert the tip of a flat-blade screwdriver into the slot on the processor locking screw. 4. Turn the screwdriver counterclockwise 1 to release the processor (Figure 5-36). 5. Remove the processor from the socket on the system board 2. ✎ When installing the processor, make sure the gold triangle 3 is in the lower right corner. Figure 5-36. Removing the Processor Reverse the preceding procedure to replace the processor. 5-52 Maintenance and Service Guide
5–52
Maintenance and Service Guide
Removal and Replacement Procedures
3. Insert the tip of a flat-blade screwdriver into the slot on the
processor locking screw.
4. Turn the screwdriver counterclockwise
1
to release the
processor (Figure 5-36).
5. Remove the processor from the socket on the system
board
2
.
✎
When installing the processor, make sure the gold triangle
3
is in
the lower right corner.
Figure 5-36. Removing the Processor
Reverse the preceding procedure to replace the processor.