Compaq Evo n600c Compaq Evo Notebook N610c and Evo N600c Series Maintenance an - Page 134
Removing the Fan on an Evo Notebook N600c, the left side of the fan up
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Removal and Replacement Procedures ✎ Steps 5 through 7 apply only to Evo Notebook N600c models. 5. Remove the PM2.0 × 4.0 screw 1 and PM2.5 × 5.0 screw 2 that secure the fan to the system board (Figure 5-31). 6. While holding the system board above the work surface, push the left side of the fan up 3 from the bottom of the system board. 7. When the left edge of the fan has cleared the system board, slide the fan to the left 4 and out of the heat sink. Figure 5-31. Removing the Fan on an Evo Notebook N600c Maintenance and Service Guide 5-45
Removal and Replacement Procedures
Maintenance and Service Guide
5–45
✎
Steps 5 through 7 apply only to Evo Notebook N600c models.
5. Remove the PM2.0 × 4.0 screw
1
and PM2.5 × 5.0 screw
2
that secure the fan to the system board (Figure 5-31).
6.
While holding the system board above the work surface, push
the left side of the fan up
3
from the bottom of the system
board.
7. When the left edge of the fan has cleared the system board,
slide the fan to the left
4
and out of the heat sink.
Figure 5-31. Removing the Fan on an Evo Notebook N600c