Compaq Evo n600c Compaq Evo Notebook N610c and Evo N600c Series Maintenance an - Page 98
Removing the Hard Drive, Separate the hard drive bezel
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Removal and Replacement Procedures b. Remove the PM2.5 × 2.5 hard drive retention screw 1 (Figure 5-4). c. Separate the hard drive bezel 2. d. Use the bezel to slide the hard drive forward 3 to unseat the hard drive connector from the system board. e. Remove the hard drive. Figure 5-4. Removing the Hard Drive Reverse the preceding procedure to install the hard drive. Maintenance and Service Guide 5-9
Removal and Replacement Procedures
Maintenance and Service Guide
5–9
b.
Remove the PM2.5 × 2.5 hard drive retention screw
1
(Figure 5-4).
c.
Separate the hard drive bezel
2
.
d.
Use the bezel to slide the hard drive forward
3
to unseat
the hard drive connector from the system board.
e.
Remove the hard drive.
Figure 5-4. Removing the Hard Drive
Reverse the preceding procedure to install the hard drive.