Compaq Evo n600c Compaq Evo Notebook N610c and Evo N600c Series Maintenance an - Page 126
Removing the System Board Screws and, Bushing Guides on an Evo Notebook N600c
View all Compaq Evo n600c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
Removal and Replacement Procedures ✎ Steps 3 through 5 apply only to Evo Notebook N600c models. 3. Remove the tape that secures the modem cable to the system board 1 (Figure 5-23). 4. Remove the two 7.0-mm bushing guides 2 on either side of the docking connector that secure the system board to the base enclosure. 5. Remove the three TM2.5 × 5.0 screws 3 that secure the system board to the base enclosure. Figure 5-23. Removing the System Board Screws and Bushing Guides on an Evo Notebook N600c Maintenance and Service Guide 5-37
Removal and Replacement Procedures
Maintenance and Service Guide
5–37
✎
Steps 3 through 5 apply only to Evo Notebook N600c models.
3. Remove the tape that secures the modem cable to the system
board
1
(Figure 5-23).
4. Remove the two 7.0-mm bushing guides
2
on either side of
the docking connector that secure the system board to the
base enclosure.
5. Remove the three TM2.5 × 5.0 screws
3
that secure the
system board to the base enclosure.
Figure 5-23. Removing the System Board Screws and
Bushing Guides on an Evo Notebook N600c