Home » Compaq Manuals » Desktops » Compaq Pro 6305 » Manual Viewer

Compaq Pro 6305 Hardware Reference Guide - Page 56

Removing a Bezel Blank, Replacing the Front Bezel

Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Removing Bezel Blanks On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to be removed before installing a drive. To remove a bezel blank: 1. Remove the access panel and front bezel. 2. To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it (2). Figure 3-4 Removing a Bezel Blank Replacing the Front Bezel Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1) then rotate the top side of the bezel onto the chassis (2) and snap it into place. Figure 3-5 Replacing the Front Bezel 48 Chapter 3 Small Form Factor (SFF) Hardware Upgrades

Section	Page
Product Features	9
Standard Configuration Features	9
Microtower (MT) Front Panel Components	10
Small Form Factor (SFF) Front Panel Components	11
Microtower (MT) Rear Panel Components	12
Small Form Factor (SFF) Rear Panel Components	13
Media Card Reader Components	14
Keyboard	15
Using the Windows Logo Key	16
Serial Number Location	18
Microtower (MT) Hardware Upgrades	19
Serviceability Features	19
Warnings and Cautions	19
Removing the Computer Access Panel	20
Replacing the Computer Access Panel	21
Removing the Front Bezel	22
Removing Bezel Blanks	23
Replacing the Front Bezel	23
System Board Connections	24
Installing Additional Memory	25
DIMMs	25
DDR3-SDRAM DIMMs	25
Populating DIMM Sockets	26
Installing DIMMs	26
Removing or Installing an Expansion Card	28
Drive Positions	32
Installing and Removing Drives	33
Removing a 5.25-inch or 3.5-inch Drive from a Drive Bay	35
Installing a 5.25-inch or 3.5-inch Drive into a Drive Bay	37
Removing a Hard Drive from a Drive Bay	40
Installing a Hard Drive into an Internal Drive Bay	41
Installing a Security Lock	45
Cable Lock	45
Padlock	45
HP Business PC Security Lock	46
Front Bezel Security	50
Small Form Factor (SFF) Hardware Upgrades	52
Serviceability Features	52
Warnings and Cautions	52
Removing the Computer Access Panel	53
Replacing the Computer Access Panel	54
Removing the Front Bezel	55
Removing Bezel Blanks	56
Replacing the Front Bezel	56
Changing from Desktop to Tower Configuration	57
System Board Connections	58
Installing Additional Memory	59
DIMMs	59
DDR3-SDRAM DIMMs	59
Populating DIMM Sockets	59
Installing DIMMs	60
Removing or Installing an Expansion Card	63
Drive Positions	67
Installing and Removing Drives	68
Removing a 5.25-inch Drive from a Drive Bay	70
Installing a 5.25-inch Drive into a Drive Bay	72
Removing a 3.5-inch Drive from a Drive Bay	75
Installing a 3.5-inch Drive into a Drive Bay	77
Removing and Replacing the Primary 3.5-inch Internal Hard Drive	79
Installing a Security Lock	83
Cable Lock	83
Padlock	83
HP Business PC Security Lock	84
Front Bezel Security	88
Battery Replacement	90
Removing and Replacing a Removable 3.5-inch SATA Hard Drive	93
Unlocking the Smart Cover Lock	98
Smart Cover FailSafe Key	98
Using the Smart Cover FailSafe Key to Remove the Smart Cover Lock	99
Electrostatic Discharge	101
Preventing Electrostatic Damage	101
Grounding Methods	101
Computer Operating Guidelines, Routine Care and Shipping Preparation	102
Computer Operating Guidelines and Routine Care	102
Optical Drive Precautions	103
Operation	103
Cleaning	103
Safety	103
Shipping Preparation	103

Match case Limit results 1 per page

Removing Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch drive bays that need to

be removed before installing a drive. To remove a bezel blank:

Remove the access panel and front bezel.

To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards

the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it

(2).

Figure 3-4

Removing a Bezel Blank

Replacing the Front Bezel

Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)

then rotate the top side of the bezel onto the chassis (2) and snap it into place.

Figure 3-5

Replacing the Front Bezel

Chapter 3

Small Form Factor (SFF) Hardware Upgrades