Compaq Pro 6305 Hardware Reference Guide - Page 61
CAUTION, WARNING, Rotating the Drive Cage Up
View all Compaq Pro 6305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: You must disconnect the power cord and wait approximately 30 seconds for the power to drain before adding or removing memory modules. Regardless of the power-on state, voltage is always supplied to the memory modules as long as the computer is plugged into an active AC outlet. Adding or removing memory modules while voltage is present may cause irreparable damage to the memory modules or system board. 5. If the computer is on a stand, remove the computer from the stand. 6. Remove the computer access panel. WARNING! To reduce risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 7. Rotate up the internal drive bay housing to access the memory module sockets on the system board. Figure 3-8 Rotating the Drive Cage Up Installing Additional Memory 53