Compaq ProLiant 3000 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator - Page 47
Recommended Cluster Communication Strategy, strategy, refer to the Compaq White Paper
View all Compaq ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2-16 Compaq ProLiant Clusters HA/F100 and HA/F200 Administrator Guide Recommended Cluster Communication Strategy The past two sections discussed the redundancy of intracluster and cluster-to-LAN communication. However, to obtain the most benefit while minimizing cost and complexity, view cluster communications as a single entity. To create redundancy for both intracluster and cluster-to-LAN communication, first, employ physical hardware redundancy for the LAN NICs. Second, configure MSCS to use both the primary and redundant LAN NIC as backup for intracluster communication. With this strategy, your cluster can continue normal operations (without a failover event) when each of the following points of failure are encountered: s Failure of the interconnect card s Failure of the port on the interconnect card s Failure of the interconnect cable s Failure of the port on the LAN NIC s Failure of the LAN NIC (if redundant NICs, as opposed to dual-ported NICs, are used) s Failure of the Ethernet cable running from a cluster node to the Ethernet hub (which connects to the LAN) The following examples describe how to physically set up your cluster nodes to employ the Compaq-recommended strategy. For more information about the strategy, refer to the Compaq White Paper, "Increasing Availability of Cluster Communications in a Windows NT Cluster."