Compaq ProLiant 3000 Compaq ProLiant Cluster HA/F100 and HA/F200 Administrator - Page 78
Setting Up the Compaq ProLiant Clusters HA/F100 and HA/F200
View all Compaq ProLiant 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Setting Up the Compaq ProLiant Clusters HA/F100 and HA/F200 3-5 s MSCS requires drive letters to remain constant throughout the life of the cluster; therefore, you must assign permanent drive letters to your shared drives. If you are performing manual software installation, use Windows NT Disk Administrator to assign drive letters and ensure the assignments are permanent. Windows NT makes dynamic drive letter assignments (when drives are added or removed, or when the boot order of drive controllers is changed), but Windows NT Disk Administrator allows you to make permanent drive letter assignments. NOTE: This step does not apply if you are using the SmartStart Assisted Integration installation. s Cluster nodes can be members of only one cluster. NOTE: It is possible to use hosts and LMHosts files, as well as DNS (Domain Name Server), for intracluster communication. However, WINS is the recommended method. s When you set up the cluster interconnect, select TCP/IP as the network protocol. MSCS requires the TCP/IP protocol. The cluster interconnect must be on its own subnet. The IP addresses of the interconnects must be static, not dynamically assigned by DHCP.