Compaq dx2818 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 102
Removing an Optical Drive
View all Compaq dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Removing an Optical Drive CAUTION: All removable media should be taken out of a drive before removing the drive from the computer. To remove an optical drive: 1. Prepare the computer for disassembly (Preparation for Disassembly on page 83). 2. Remove the access panel (Access Panel on page 84). 3. Remove the front bezel (Front Bezel on page 85). 4. Disconnect the power cable (1) and data cable (2) from the rear of the optical drive. Figure 8-7 Disconnecting the Power and Data Cables 5. Rotate the drive cage all the way up. Figure 8-8 Rotating the Drive Cage Up 92 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Removing an Optical Drive
CAUTION:
All removable media should be taken out of a drive before removing the drive from the
computer.
To remove an optical drive:
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
83
).
2.
Remove the access panel (
Access Panel
on page
84
).
3.
Remove the front bezel (
Front Bezel
on page
85
).
4.
Disconnect the power cable
(1)
and data cable
(2)
from the rear of the optical drive.
Figure 8-7
Disconnecting the Power and Data Cables
5.
Rotate the drive cage all the way up.
Figure 8-8
Rotating the Drive Cage Up
92
Chapter 8
Removal and Replacement Procedures Small Form Factor (SFF) Chassis