Compaq dx2818 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 74
CAUTION, Connecting the Hard Drive Cables
View all Compaq dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3. Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 7-32 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 4. Place the hard drive cage into the chassis (1), then slide it down toward the bottom of the chassis until it locks into place (2). Figure 7-33 Installing the Hard Drive Cage 64 Chapter 7 Removal and Replacement Procedures Microtower (MT) Chassis
3.
Connect the power cable
(1)
and data cable
(2)
to the back of the hard drive.
Figure 7-32
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
4.
Place the hard drive cage into the chassis
(1)
, then slide it down toward the bottom of the chassis
until it locks into place
(2)
.
Figure 7-33
Installing the Hard Drive Cage
64
Chapter 7
Removal and Replacement Procedures Microtower (MT) Chassis