Compaq dx2818 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 106
Preparation for Disassembly, on Access Panel, Front Bezel
![]() |
View all Compaq dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
NOTE: The 3.5-inch drive bay may contain a diskette drive or a media card reader. 1. Prepare the computer for disassembly (Preparation for Disassembly on page 83). 2. Remove the access panel (Access Panel on page 84). 3. Remove the front bezel (Front Bezel on page 85). 4. Disconnect the data cable (1) and power cable (2) from the rear of the drive. Figure 8-15 Disconnecting the Diskette Drive Cables 5. Rotate the drive cage all the way up. Figure 8-16 Rotating the Drive Cage Up 96 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
![](/manual_guide/products/compaq-dx2810-service-reference-guide-hp-compaq-dx2810-dx2818-business-pc-dx2810-small-form-factor-business-pc-1fa5fe9/106.png)
NOTE:
The 3.5-inch drive bay may contain a diskette drive or a media card reader.
1.
Prepare the computer for disassembly (
Preparation for Disassembly
on page
83
).
2.
Remove the access panel (
Access Panel
on page
84
).
3.
Remove the front bezel (
Front Bezel
on page
85
).
4.
Disconnect the data cable
(1)
and power cable
(2)
from the rear of the drive.
Figure 8-15
Disconnecting the Diskette Drive Cables
5.
Rotate the drive cage all the way up.
Figure 8-16
Rotating the Drive Cage Up
96
Chapter 8
Removal and Replacement Procedures Small Form Factor (SFF) Chassis