Compaq dx2818 Service Reference Guide: HP Compaq dx2810 and dx2818 Business PC - Page 104
Rotating the Drive Cage Up, Installing the Optical Drive
![]() |
View all Compaq dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
6. Rotate the drive cage all the way up. Figure 8-11 Rotating the Drive Cage Up 7. Align the guide screw on the drive with the slot on the chassis. Slide the optical drive into the drive bay until the two screw holes on the right side of the drive line up with the two screw holes on the right side of the drive cage (1). 8. Secure the optical drive by fastening two retainer screws through the holes in the right side of the drive cage into the corresponding holes in the right side of the optical drive (2). NOTE: Extra retainer screws are provided on the front of the chassis under the hard drive cage. The M3 metric retainer screws for optical drives are black. Figure 8-12 Installing the Optical Drive 94 Chapter 8 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
![](/manual_guide/products/compaq-dx2810-service-reference-guide-hp-compaq-dx2810-dx2818-business-pc-dx2810-small-form-factor-business-pc-1fa5fe9/104.png)