Craftsman 21805 Operation Manual - Page 19
Align The Spreader
![]() |
View all Craftsman 21805 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TO CHECK AND ALIGN THE SPREADER, SAW BLADE, AND BLADE GUARD ASSEMBLY See Figure 17. If the blade guard assembly is out of alignment with the saw blade, adjust the alignment of the blade guard assembly. The spreader must be aLigned with the saw blade. To check alignment of the spreader: • Unplug the saw. / Raise the saw blade by turning the height!bevel adjusting handwheel counterclockwise. • Lift the anti-kickback pawls and place a framing square or straight edge against both the saw blade and the spreader, • Thesawbladeandspreaderareallgnedwhentheframing square contaCtS beth the blade and spreader evenly with no gaps. If the spreader and saw blade are not in alignment, adjustment is needed. To adjust: • Unplug the saw then raise the blade guard assembly. m Loosen the wing nut holding the blade guard assembly to the mounting bracket. • Reposition the blade guard assembly left or right as needed to align the spreader with the saw blade. • Once properly aligned, securely retighten the wing nut. SPREADER FRAMING SQUARE Fig. 17 _IL WARNING: De not allow familiarity with tools to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. _IL WARNING: Always wear safety goggles or safety glasses with side shieldswhen operating tools. FaiLureto do so could result in objects being thrown into your eyes in possibleserious injury. _IL WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not recommended can resurt in serious personal injury. _1, WARNING; Although many of the illustrations in this manual are shown with the blade guard removed for clarity, do not operate the saw without the blade guard unless specifically instructed to do so. 19
![](/manual_guide/products/craftsman-21805-operation-manual-d41b46a/19.png)