Craftsman 27675 Operation Manual - Page 10

ADDITIONAL RULES FOR SAFE OPERATION cont. 6. INSPECT the tool cords periodically and if damaged have them repaired at your nearest Sears Service Center. ALWAYS BE AWARE of the cord location. 7. ALWAYS check the tool for damaged parts. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine if it will operate properly and perform its intended function. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. A guard or other part that is damaged should be properly repaired or replaced at a Sears Service center. 8. SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others who may use this tool. If someone borrows this tool, make sure they have these instructions also. /_ WARNING: This power tool should NEVER be €-onnected to the power source when you are assembling parts, making adjustments, installing or removing sandpaper, cleaning or when it is not in use. Disconnecting the sander will prevent accidental starting, which could cause serious personal injury. 1. Remove the sander from the carton and inspect it carefully to make sure that no breakage or damage has occurred during shipping. 2. Do not discard any of the packing materials until all parts are accounted for. 3. Included with your sander is a dust bag assembly, with vac adapter. 4. 2 discs of hook and loop sandpaper are included; orle fine grit, and one medium grit. 5. If any of the parts are damaged or missing (refer to PAFr]-s LIST below), return the sander to your nearest Sears store or Craftsman outlet to have the sander replaced. ] I tph/eIeXrsmoWnisAaslRinNingIjNuprGayr.:ts aIfreanreypplaacretsd.arFeaimluirsesitnog,doDOsoNcOoTuldopererastuelt tihnispopsoswibelre tosoelriouunstil I 10