Craftsman 27675 Operation Manual - Page 8

Lead Based Paint - sander #

Page 8 highlights

z_ WARNING: Some dust created by using power tools contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks and cement and other masonry products. • Arsenic and chromium, from chemically treated lumber. Your risk from these exposures varies, depending upon how often you do this type of work. To reduce your exposure to these chemicals: • Work in a well-ventilated area. • Work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling and other construction activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals. /_ WARNING: Use of this tool can generate and/or disburse dust, which may cause serious and permanent respiratory or other injury. Always use NIOSH/OSHA approved respiratory protection appropriate for the dust exposure. Direct particles away from face and body. /_ WARNING: Collected sanding dust from sanding :surface coatings (polyurethane, linseed oil, etc.) can self-ignite in sander dust bag or elsewhere and cause fire. To reduce risk, empty dust bag frequently and strictly follow sander manual and coating manufacturer's instructions. /_ CAUTION: When working on metal surfaces, DO NOT use the dust bag or a vacuum cleaner because sparks are generated. Wear safety glasses and a dust mask. Due to the danger of fire, do not use your sander to sand magnesium surfaces. Do not use for wet sanding. SANDING PAINTS SANDING LEAD BASED PAINT is NOT RECOMMENDED ('Jueto the difficulty of controllingthe contaminated dust. The greatest danger of lead poisoning is to children and pregnant women. Since it is difficult to identify whether or not a paint contains lead without a chemical analysis, we recommend the following precautions when sanding any paint: • NO children or pregnant women should enter the work area where the paint sanding is being done until all clean up is completed. • A dust mask or respirator should be worn by all persons entering the work area. The filter should be replaced daily, or whenever (if) the wearer has difficulty breathing.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51

z_
WARNING:
Some dust created by using power tools contains chemicals
known to the State of California to cause cancer and birth defects or other
reproductive
harm. Some examples of these chemicals
are:
Lead from lead-based
paints.
Crystalline
silica from bricks and cement and other masonry products.
Arsenic and chromium, from chemically
treated lumber.
Your risk from these exposures
varies, depending
upon how often you do
this type of work. To reduce your exposure to these
chemicals:
Work in a well-ventilated
area.
Work with approved safety equipment,
such as those dust masks that
are specially
designed to filter out microscopic
particles.
Avoid prolonged
contact with dust from power sanding, sawing, grinding,
drilling and other construction
activities. Wear protective clothing and wash
exposed areas with soap and water. Allowing
dust to get into your mouth,
eyes, or lay on the skin may promote absorption
of harmful chemicals.
/_
WARNING:
Use of this tool can generate and/or
disburse dust, which may
cause serious and permanent
respiratory
or other injury. Always use
NIOSH/OSHA
approved respiratory
protection appropriate
for the dust exposure.
Direct particles away from face and body.
/_
WARNING:
Collected sanding
dust from sanding
:surface coatings
(polyurethane,
linseed oil, etc.) can self-ignite
in sander dust bag or elsewhere
and cause fire. To reduce risk, empty dust bag frequently
and strictly follow
sander manual and coating manufacturer's
instructions.
/_
CAUTION:
When working on metal surfaces, DO NOT use the dust bag
or a vacuum cleaner because sparks are generated.
Wear
safety glasses and a
dust mask. Due to the danger of fire, do not use your
sander
to sand magnesium
surfaces. Do not use for wet sanding.
SANDING
PAINTS
SANDING
LEAD BASED PAINT
is
NOT RECOMMENDED
('Jueto
the difficulty of
controllingthe contaminated dust. The greatest danger
of
lead poisoning is to children
and pregnant women.
Since it
is
difficult to identify
whether or
not a paint contains lead without a chemical
analysis, we recommend the following
precautions when sanding any paint:
• NO children or pregnant women should enter the work area where the
paint sanding is being done until all clean up is completed.
• A dust mask or respirator should be worn by all persons entering the
work
area. The filter should be replaced daily, or whenever
(if) the wearer has
difficulty breathing.