Craftsman 27675 Operation Manual - Page 5

Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander Manual

Get Craftsman 27675 - Professional 5 in. 3.0 Amp Random Orbit Sander PDF manuals and user guides View all Craftsman 27675 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

TOOL USE AND CARE SAFETY /_ WARNING: BE SURE to read and understand all instructions before operating this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. !I 1. ALWAYS use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. 2. DO NOT force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. DO NOT use the tool if switch does not turn it "On" or "Off". Any tool that cannot be controlled with the switch is dangerous and must be repaired. 4. DISCONNECT the plug from the power source before making any adjustments, changing accessories or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 5. STORE idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 6. MAINTAIN tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control. 7. Keep sandpaper clean, remove excess build-up of dust and debris. Replace sandpaper when worn, this will provide better sanding results. 8. CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool's operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 9. USE ONLY accessories that are recommended for tills tool. Accessories that may be suitable for one tool may become hazardous wlhen used on another tool. /_ WARNING: Empty dust bag before storage to Ilelp prevent possible fire I I hazard, especially when resin coating or linseed oil finishes have been sanded. ELECTRICAL SAFETY /_ WARNING: Do not permit fingers to touch the terminals of plug when installing or removing the plug from the outlet. 1. Double insulated tools are equipped with a polarized plug (one blade is wider than the other).This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Cover of Grounded Outlet Box ------ O ® @ 5 27675 2/11/08

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
TOOL
USE
AND
CARE
SAFETY
/_
WARNING:
BE SURE to read and understand
all instructions
before
I
operating this power tool. Failure to follow all instructions
listed below may
!
result in electric shock, fire and/or serious personal injury.
1. ALWAYS use clamps or other practical ways to secure and support the
workpiece
to a stable platform. Holding the work by
hand
or against your body
is unstable and
may
lead to loss of control.
2. DO NOT force the tool. Use the correct tool for your application.
The correct tool
will do the job better and safer at the rate
for
which it is designed.
3. DO NOT use the tool if switch does not turn it
"On"
or
"Off".
Any tool that
cannot be controlled
with
the switch
is
dangerous and must be repaired.
4.
DISCONNECT
the plug from the power source before making any
adjustments,
changing accessories
or storing the tool.
Such preventive
safety measures reduce the risk of starting the tool accidentally.
5. STORE idle tools out of the reach of children and other untrained
persons.
Tools are dangerous in the hands of untrained users.
6.
MAINTAIN tools with care. Keep cutting tools sharp and clean.
Properly maintained
tools with sharp cutting
edges
are less likely to bind and are easier to control.
7.
Keep sandpaper
clean, remove excess build-up of
dust
and debris.
Replace
sandpaper when worn, this will provide better sanding
results.
8. CHECK for misalignment
or binding of moving parts, breakage of parts, and
any other condition that
may
affect the tool's operation. If damaged,
have the
tool serviced before using. Many accidents are caused by poorly maintained tools.
9. USE ONLY accessories that are recommended
for tills tool. Accessories that
may
be suitable
for
one tool
may
become hazardous wlhen
used
on another tool.
/_
WARNING:
Empty dust bag before storage to Ilelp prevent possible fire
I
hazard, especially
when resin coating or linseed oil finishes have been sanded.
I
ELECTRICAL
SAFETY
/_
WARNING:
Do not permit fingers to touch
the terminals
of plug when installing or removing
the plug from the outlet.
1. Double insulated tools are equipped with a polarized
plug (one blade is wider than the other).This
plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse
the
plug. If
it
still
does not fit, contact a qualified
electrician
to install a
polarized outlet. Do not change the plug in any way.
5
Cover
of
Grounded
Outlet
Box ------
O
®
@
27675
2/11/08