Craftsman 28195 Product Manual - Page 13

Spindle: The shaft on which the cutting tool is mounted. Also called the Arbor. Through Sawing: Any cutting operation where the blade extends completely through the thickness of the workpiece. A WARNING: If any parts are broken or missing, DO NOT attempt to plug in the power cord or operate the saw until the broken or missing parts are replaced. Failure to do so could result in possibly serious injury. WARNING: Do not attempt to modify this saw or create accessories not recommended for use with this saw. Any such alteration or modification is misuse and could result in a hazardous condition leading to possibly serious injury. ,_ WARNING: To prevent accidental starting that could cause serious personal injury, always disconnect the tool from the power source when assembling parts. UNPACKING This product has been shipped completely assembled, except cutting blade. 1. Carefully remove the tool and the accessories from the box. Make sure that all items listed in the packing list are included. 2. Inspect the tool carefully to make sure that no breakage or damage occurred during shipping. 3. Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool. 4. If any parts are damaged or missing, return the product for replacement. PARTS LIST (Fig. 1) Fig. 1 2. Edge Guide 3. Blade Wrench 1.7-1/4-in Hypoid Circular Saw with Saw Blade 28195 Manual_Revised_07-0623 Page 13