Craftsman 28195 Product Manual - Page 15
AC ONLY power
View all Craftsman 28195 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
NOTE: Before attempting to use your saw, familiarize yourself with all of the operating features and safety requirements. Your hypoid circular saw has a precision-built electric motor and it should only be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate on direct current (DC). This large voltage drop will cause a loss of power and the motor will overheat. If the saw does not operate when plugged into correct 120-volt, 60-Hz AC ONLY outlet, check the power supply. The saw has a 10-ft, 2-wire power cord (no adapter needed). This Hypoid Circular Saw has the following features: * 15 Amp, 4400 RPM (no-load speed) motor provides power and torque for fast, sure cuts in wood, plywood, hardboard, and wood-base materials. * Quick depth-of-cut adjustments with maximum depth of cut: 2-3/8-in. thick at 90°; 1-13/16-in. thick at 45 ° Easy-to-read bevel-cut scale adjusts from 0° to 51° bevel capacity. Heavy duty, lightweight, magnesium upper and lower blade guards for extra strength and durability. Extended-length trigger switch for maximum control and comfort. Punched Aluminum base provides stability for maximum control during sawing applications. Rear handle and front assist handle for positive gripping, control, balance, and comfort. Includes Freud 24-tooth, carbide-tipped steel, blade for fast, smooth cuts. Front-mounted spindle lock for easy blade changes. Built-in sawdust-ejection chute helps direct dust and chips away from the operator. Permanently lubricated ball bearings throughout for smooth operation and long motor life. Durable, machined hypoid gearing for efficient power transmission. Input Rating No-load Speed Blade Diameter Cutting Depth at 90 ° Cutting Depth at 45 ° Maximum Bevel Angle PRODUCT SPECIFICATIONS 15 Amps 120V, 60Hz AC 4400RPM 7-1/4 in. (184mm) 2-3/8 in. (59.5mm) 1-13/16 in. (42.5mm) 51° 28195 Manual_Revised_07-0623 Page i5