Craftsman 28945 Operation Manual - Page 11
Rmower
View all Craftsman 28945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9 INSTALL BELT ON ENGINE CLUTCH PULLEY (M) • Disengage belt tension rod (K) from locking bracket (L). • Install belt onto engine clutch pulley (M). C. Rear Lift Link(s) D. Right Side Rear Mower Bracket 'U. Hole 8 ATTACH FRONT LINK (E) • Turn steering wheel to position wheels straight forward. • From front of tractor, insert rod end of front link (E) through front hole in tractor front suspension bracket (F). • Move to left side of mower and and insert large retainer spring (G) through hole in front link (E) behind front suspension bracket (F). • Insert other end of link (E) into hole in front mower bracket (H) and secure with washer and small retainer spring (J). NOTE: Requires deck lifting. Front Link Location, M,Engine Clutch Pulley IMPORTANT: Check belt for proper routing in all mower pulley grooves and under mandrel covers. * Engage belt tension rod (K) on locking bracket (L). _ICAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly. , Raise attachment position. lift lever to highest , If necessary, adjust gauge wheels before operating mower as shown in the Operation section of this manual. MOWER DRIVE BELT INSTALLATION Follow procedure described in "TO REPLACE MOWER BLADE DRIVE BELT" in the "Service and Adjustments" section of this manual. E. Front Lift Link Assembly R Front Suspension Bracket G, Large Retainer Spring H, Front Mower Bracket J. Small Retainer Spring M, Engine Clutch Pulley 11