Craftsman 28945 Operation Manual - Page 25
Warning, Serious, Injury, Performing, Service, Or Adjustments, Install, Mower
View all Craftsman 28945 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: 1. Depress clutch/brake pedal fully and set parking brake. 2. Place gearshift lever in neutral position. 3. Place attachment clutch in "DISENGAGED" position. 4. Turn ignition key to "STOP" and remove key. 5. Make sure the blades and all moving parts have completely stopped. 6. Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. TO REMOVE MOWER 1. Place attachment clutch in "DISEN- GAGED" position. 2. Lower attachment lift lever to its lowest position. 3. Disengage belt tension rod (K) from lock bracket (L). CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly. 4. Remove mower belt from electric clutch pulley (M). 5. Disconnect front link (E) from mower - remove retainer spring and washer. 6. Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) - remove retainer springs and washers. 7. Goto otherside ofmowerand disconnect the suspension arm and rear lift link. ,_ CAUTION: After rear lift links are discon- nected, the attachment lift lever will be spring loaded. Have a tight grip on lift lever when changing position of the lever. 8. From right side of mower, disconnect anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring and washer and pull mower toward you until the bar falls from the hole in bracket. 9. Turn tractor steering wheel to the left as far as it will go. 10. Slide mower out from under right side of tractor. TO INSTALL MOWER Follow procedure described in "INSTALL MOWER AN D DRIVE BELT" in the Assembly section of this manual. \\ 25