Craftsman 28992 Operation Manual - Page 20
Advanced, Driving
View all Craftsman 28992 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Practice Turning Around a Corner While traveling forward allow one handle to gradually return back toward neutral (see Figure 12). Practice several times before mowing. NOTE: To prevent damaging your lawn by pivoting directly on the tire tread, it is best to keep both wheels going at least slightly forward. Practice Turning In Place To "zero turn" means to turn in place. To turn in place, gradually move one ground speed control lever forward from neutral and one lever back from neutral simultaneously (see Figure 13). Repeat several times. Executing Turns Turning In Place Figure 12. RightTurn ADVANCED DRIVING Executing an End-Of-Row Zero Turn Your zero turn rider's unique ability to turn in place allows you to turn around at the end of a cutting row rather than having to stop and make a Y-turn before starting a new row. For example, to execute a right end-of row zero turn: 1. Slow down at the end of the row. 2. Move the LEFT ground speed control lever forward slightly while moving the RIGHT ground speed control lever back to center and then slightly back from center (see Figure 14). Be sure to keep both wheels moving to avoid turf damage. 3. Begin mowing forward again. This technique turns the rider RIGHT and slightly overlaps the row just cut - eliminating the need to back up and re-cut missed grass. As you become more familiar and experienced with operating the zero turn rider, you will learn more maneuvers that will make your mowing time easier and more enjoyable. Remember, the more you practice, the better your control of the rider will be! Figure 13. Turning in Place Figure 14. Executing an End-Of-Row Turn 20