Cub Cadet GTX 1054 Garden Tractor GTX 1054 Operator's Manual - Page 29
Changing the Transmission Drive Belt
View all Cub Cadet GTX 1054 Garden Tractor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
10. Pull the right side of the belt and place the narrow V side of the belt into the PTO pulley. See Figure 7-9. 11. While holding the belt and pulley together, rotate the pulley to the left (See Figure 7-9). Continue holding and rotating the pulley and belt until the belt is fully rolled into the PTO pulley. Changing the Transmission Drive Belt Several components must be removed and special tools used in order to change the tractor's transmission drive belt. See your Cub Cadet dealer to have the transmission drive belt replaced. Deck Idler Front Spindle Pulleys Pulley Outer Spindle Pulleys Figure 7-9 Section 7 - Service 29
10.
Pull the right side of the belt and place the narrow V side of
the belt into the PTO pulley. See Figure 7-9.
11.
While holding the belt and pulley together, rotate the
pulley to the left (See Figure 7-9). Continue holding and
rotating the pulley and belt until the belt is fully rolled into
the PTO pulley.
Front Spindle
Pulley
Outer Spindle
Pulleys
Deck Idler
Pulleys
Figure 7-9
Changing the Transmission Drive Belt
Several components must be removed and special tools used in
order to change the tractor’s transmission drive belt. See your
Cub Cadet dealer to have the transmission drive belt replaced.
29
S
ECTION
7 — S
ERVICE