Cub Cadet Z-Force S Commercial 60 Z-Force S Commercial 48 Operator's Manual - Page 10

2. Remove the two shoulder bolts and lock nuts in the seat pan as shown in Figure 3-3. Adjusting the Seat To adjust the position of the seat, push the seat adjustment lever to the left. Slide the seat forward or rearward to the desired position; then release the adjustment lever. Make sure seat is locked into position before operating the tractor. See Figure 3-5. Figure 3-3 3. Rotate the seat into position and secure the seat into place with the previously removed shoulder bolts and lock nuts. Be careful not to crimp or damage the wire harness while installing the seat. See Figure 3-4. Figure 3-5 Install the Rear Hitch Bracket 1. Remove the hex flange screws and flange lock nuts that secure the hitch bracket and muffler mount bracket to the bumper bracket. See Figure 3-6. Figure 3-4 10 Section 2- Assembly & Set-Up Hex Flange Hitch Screws Bracket Flange Lock Nuts Muffler Mount Bracket Figure 3-6