Cuisinart SS-10P1 User Manual - Page 3

SPECIAL CORD SET INSTRUCTIONS A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord. Longer extension cords are available and may be used if care is exercised in their use. If a long extension cord is used, the marked electrical rating of the extension cord must be at least as great as the electrical rating of the appliance. The extension cord should be a grounding-type 3-wire cord, and the longer cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over. NOTICE If you have a die-cast metal unit, for your protection it is equipped with a 3-conductor cord set that has a molded 3-prong grounding-type plug, and should be used in combination with a properly connected grounding-type outlet as shown in Figure A. A. Circuit Grounding Conductor Connected Properly Grounding Prong B. Adapter Grounding Lug C. Cover Mounting Screw Cover of Grounded Outlet Box WARNING RISK OF FIRE OR ELECTRIC SHOCK DO NOT OPEN If a grounding-type outlet is not available, an adapter, shown in Figure B, may be obtained so that a 2-slot wall outlet can be used with a 3-prong plug. As shown in Figure C, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate. NOTE: Do not remove the grounding prong. CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded. Note: Use of an adapter is not permitted in Canada. IMPORTANT UNPACKING INSTRUCTIONS 1. Place the box on a large, sturdy, flat surface. 2. Open the lid of the box. 3. Remove the instruction book and any other literature. 4. Take out the coffeemaker along with the pulp carton and place it on a large, sturdy, flat surface. 5. Take the top pulp carton off. 6. Take the product out of the bottom pulp carton and stand it on a large and sturdy, flat surface. 7. Remove the packaging that covers the coffeemaker. We suggest you save all packing materials in the event that future shipping of the machine is needed. Keep all plastic bags away from children. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE PERSONNEL ONLY 3