D-Link DAP-1522 Product Manual - Page 31
DHCP Server - d link default ip address
UPC - 790069311864
View all D-Link DAP-1522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 3 - Configuration DHCP Server DHCP stands for Dynamic Host Control Protocol. The DAP-1522 has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to "Obtain an IP Address Automatically." When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DAP-1522. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. Enable DHCP Check to enable the DHCP Server on the access Server: point. IP Address From/ Enter the IP address range to assign to the To: clients on your network. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Default Subnet Enter the subnet mask. Mask: Default Gateway: Enter the default gateway IP address. Default Wins: Enter the WINS server IP address. Default DNS: Enter the DNS server IP address. DHCP Lease Enter the DHCP lease time (in minutes). Time: DHCP Client List: Clients on your network that are assigned IP addresses will be displayed here. D-Link DAP-1522 User Manual 31