D-Link DAP-1522 Product Manual - Page 77
Configure WPA-Enterprise AP Mode - setup access point
UPC - 790069311864
View all D-Link DAP-1522 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Section 4 - Security Configure WPA-Enterprise (AP Mode) It is recommended to enable encryption on your wireless access point before your wireless network adapters. Please establish wireless connectivity before enabling encryption.Your wireless signal may degrade when enabling encryption due to the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the access point (192.168.0.50). Click on Setup and then click Wireless Settings on the left side. 2. Next to Security Mode in the Wireless Security Mode section, select WPA-Enterprise. 3. Next to WPA Mode in the WPA section, select Auto (WPA or WPA2), WPA2 Only, or WPA Only. Use Auto if you have wireless clients using both WPA and WPA2. 4. Next to Cipher Type, select TKIP, AES, or TKIP and AES. 5. Next to Group Key Update Interval, enter the amount of time before the group key used for broadcast and multicast data is changed. 6. Next to RADIUS Server IP Address in the EAP (802.1X) section, enter the IP Address of your RADIUS server. 7. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 1812 is the default port. 8. Next to RADIUS Server Shared Secret, enter the security key. 9. Click Save Settings at the top of the window to save your settings. D-Link DAP-1522 User Manual 77