D-Link DAP-3320 User Manual - Page 18
Method 2 - Powered by PoE Injector
View all D-Link DAP-3320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Section 2 - Installation Method 2 - Powered by PoE Injector If you wish to power the DAP-3320 without a PoE switch, we suggest you use a PoE injector, such as a DPE-301GI. 1. Connect one end of an Ethernet cable into the DATA IN port on the PoE injector and the other end into a port on your switch, router, or computer. 2. Connect one end of a different Ethernet cable into the P+DATA OUT port on the PoE injector and the other end into the LAN (PoE) port on the DAP-3320 access point. 3. Connect the supplied power adapter to the POWER IN connector on the PoE Injector. 4. Plug the power adapter into a power outlet. D-Link DAP-3320 User Manual 13
13
D-Link DAP-3320 User Manual
Section 2 - Installation
Method 2 - Powered by PoE Injector
If you wish to power the DAP-3320 without a PoE switch, we suggest you use a PoE injector, such as a DPE-301GI.
1. Connect one end of an Ethernet cable into the
DATA IN
port on the PoE injector and the other end into a port on your
switch, router, or computer.
2.
Connect one end of a diļ¬erent Ethernet cable into the
P+DATA OUT
port on the PoE injector and the other end into the
LAN
(PoE)
port on the DAP-3320 access point.
3.
Connect the supplied power adapter to the
POWER IN
connector on the PoE Injector.
4.
Plug the power adapter into a power outlet.