D-Link DCS-934L User Manual - Page 31
Wireless Setup
View all D-Link DCS-934L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Section 4 - Configuration Wireless Setup This section allows you to setup and configure the wireless settings on your camera. Wireless Settings: Click Enable to turn on the wireless function or click Disable to disable. SSID: Enter a Service Set Identifier, or a unique name, for your wireless network. Channel: The default setting is channel 6. Select the same channel that is being used by other wireless devices within your network. When there is interference from the wireless networks that overlap with one another, you can change the channel to obtain better performance. Connection Mode: Select Infrastructure if you are connecting your camera to a wireless router or access point. Use Ad-Hoc if you are wirelessly connecting to your PC without a wireless router or access point. Site Survey: Click this to scan for available wireless networks to connect to. You will then be able to select a wireless network from a list of available networks. Wireless Security For security, there are three choices; None, WEP, and WPA-PSK / WPA2-PSK. Mode: Select the encryption method that is being used by your wireless device/router. WPA-PSK / If you choose WPA-PSK/WPA2-PSK as your wireless security mode, enter the key WPA2‑PSK (password) for your wireless network. Settings: Click Save Settings to save your settings. D-Link DCS-934L User Manual 31