D-Link DCS-934L User Manual - Page 57

Troubleshooting - d link reviews

Get D-Link DCS-934L PDF manuals and user guides View all D-Link DCS-934L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Section 6 - Troubleshooting Troubleshooting This section provides solutions to problems that may occur during the installation and operation of the DCS-934L. Review the following questions and answers if you are having difficulty. 1. What is Remote Access? How do I enable it? Remote Access allows you to access your camera from any PC connected to the Internet through a Web browser. This lets you view your camera feed and manage your camera's settings when you're away from home. To enable Remote Access, simply go through the Camera Setup Wizard. You can download the wizard from http://www.mydlink.com/support. Refer to "Camera Setup Wizard" on page 18. 2. Why does the LED not light up? The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the power supply is correctly connected. If the camera is functioning normally, the LED may have been disabled. Refer to LED Control under "Admin" on page 44 to learn how to enable the LED. 3. Why is the camera's network connection unreliable? There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the network. If the cabling is okay and your network is reachable, you should receive a reply similar to the following (...bytes = 32 time = 2 ms). Another possible problem may be that the network device such as a hub or switch utilized by the network camera is not functioning properly. Confirm that the power for the devices are well-connected and functioning properly. 4. What can I do if I forget my password? If you forget your password, you must reset your camera. Unfortunately, this process will change all your settings back to the factory defaults. To reset your camera, use an unfolded paper clip to press and hold the RESET button for at least 10 seconds while your camera is powered on. Reset Button D-Link DCS-934L User Manual 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
57
D-Link DCS-934L User Manual
Section 6 - Troubleshooting
Troubleshooting
This section provides solutions to problems that may occur during the installation and operation of the DCS-934L. Review the following questions
and answers if you are having difficulty.
1. What is Remote Access? How do I enable it?
Remote Access allows you to access your camera from any PC connected to the Internet through a Web browser. This lets you view your camera
feed and manage your camera’s settings when you’re away from home.
To enable Remote Access, simply go through the Camera Setup Wizard. You can download the wizard from
.
Refer to
“Camera Setup Wizard” on page 18
.
2. Why does the LED not light up?
The power supply might be faulty. Confirm that you are using the provided DC 5V power supply for this network camera. Verify that the power
supply is correctly connected. If the camera is functioning normally, the LED may have been disabled. Refer to
LED Control
under “
Admin” on page
44
to learn how to enable the LED.
3. Why is the camera’s network connection unreliable?
There might be a problem with the network cable. To confirm that the cables are working, PING the address of a known device on the network. If
the cabling is okay and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms).
Another possible problem may be that the network device such as a hub or switch utilized by the network camera is not functioning properly.
Confirm that the power for the devices are well-connected and functioning properly.
4. What can I do if I forget my password?
If you forget your password, you must reset your camera. Unfortunately, this process will change all
your settings back to the factory defaults. To reset your camera, use an unfolded paper clip to press
and hold the RESET button for at least 10 seconds while your camera is powered on.
Reset Button