D-Link DCS-934L User Manual - Page 40

Section 4 - Configuration FTP This section allows you to configure the camera to send snapshots to an FTP server. Host Name: This is the IP address of the FTP server that you will be connecting to. Port: Default is port 21. If changed, external FTP client program must change the server connection port accordingly. User Name: Specifies the user name to access the external FTP server. If you are to upload snapshots to an FTP server you will need to fill in the Domain name or IP address of your external FTP server. The following user settings must be correctly configured for remote access. Password: Specifies the password to access the external FTP server. Path: Specifies the destination folder in the external FTP server. Passive Mode: Enabling passive mode will allow access to an external FTP server if your camera is behind a router protected by a firewall. Enable uploading Check to enable this option allowing snapshots to be uploaded to the FTP server of images to an using the settings entered above. FTP server: • Choosing Always will continuously upload snapshots to the FTP server, beginning right away. • Choosing Schedule will allow you to select a schedule for when to start and stop the uploading of snapshots. • Select Motion/Sound Detection if you would like to upload snapshots only when motion or sound is detected. Image Select the rate at which you want the camera to take snapshots. The user can Frequency: define both Frames/Second and Seconds/Frame. • If Always is selected, snapshots will be continuously uploaded according to the selected image frequency. • If Schedule is selected, snapshots will be uploaded according to this image frequency during the days and times specified in the schedule. • If Motion/Sound Detection is selected, snapshots will be uploaded according to this image frequency while motion or sound is being detected. D-Link DCS-934L User Manual 40