D-Link DG-104SH Product Manual - Page 10
Phone 1 to 4, Link/Act, nection to a dual-speed or 100BASE-TX Fast Ethernet device.
View all D-Link DG-104SH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Understanding Indicators LAN: This LED displays the connection speed, link status, and activity on the 10/100 dual-speed Ethernet port that is used to connect to your LAN. 10/100M: This indicator remains unlit when there is no connection, or the port is operating at 10Mbps through a connection to a 10BASE-T device. It is lit when the port is operating at 100Mbps through a connection to a dual-speed or 100BASE-TX Fast Ethernet device. Link/Act: When a good link to a powered-up but idle device is detected on a port, this indicator shines steadily. When packets are received from the device, the indicator blinks off and on. Line: Lights when PSTN line is in use. Phone 1 to 4: Lights when standard phone port is in use. Note: If a powered-up device is connected to a port and the port's Link/Act status indicator is unlit, the most probable cause is a cabling or connection problem (for example, wrong cable type or bad contact) or a device malfunction. 10