D-Link DGS-1100-08PV2 User Manual 1.00 WW - Page 21

4 Configuration D-Link Smart Managed Switch User Manual Figure 4.17 - System > PoE > PoE System The fields that can be configured for PoE System are described below: Item Description PoE System PoE Power Threshold. (Only for DGS-110008PV2) Manually configure the system power budget. The power budget range is between 7.1 and 64 Watts. Power shut Off Sequence Defines the method used to deny power to a port once the threshold is reached. The possible fields are:  Deny next port: When the power budget is exceeded, the next port attempting to power up is denied, regardless of the port priority.  Deny low priority port: The port with the lower priority will be shut down to allow the higher priority port to power up. System Power Status Total PoE Power Budget Displays the total PoE power budget of this switch. Power Used Displays the current used power of the switch. Power Left Displays the spare power of the switch. The percentage of system supplied Displays the percentage of system power supplied of the switch. Table 4.4 Click Apply to make the configurations take effect. System > PoE > PoE Configuration (DGS-1100-05PDV2/08PV2 only) The DGS-1100-05PDV2/08PV2 support Power over Ethernet (PoE) as defined by the IEEE specification. The PoE port specification is listed in the table below: Model Name PoE Capable Ports Power Budget DGS-1100-05PDV2 Port 1 ~ Port 2: Max. PoE Output 15.4 Watts 18 Watts DGS-1100-08PV2 Port 1 ~ Port 8: Max. PoE Output 30 Watts 64 Watts The DGS-1100-05PDV2 and DGS-1100-08PV2 work with D-Link 802.3af or 802.3at capable devices. IEEE 802.3at defined that the PSE provides power according to the following classification: Class Usage Output power limit by PSE 18