D-Link DGS-1100-08PV2 User Manual 1.00 WW - Page 38
QoS > Port Rate Limiting, Global Settings, IEEE 802.1p Default Priority Settings
View all D-Link DGS-1100-08PV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
4 Configuration D-Link Smart Managed Switch User Manual Figure 4.44 - QoS > 802.1p/DSCP Default Priority The fields that can be configured are described below: Item Description Global Settings Select QoS mode D-Link Smart Managed Switch allows the user to prioritize the traffic based on the 802.1p priority in the VLAN tag or the DSCP (Differentiated Services Code Point) priority in the IP header. Only one mechanism is selected to prioritize the packets at a time. Queuing mechanism Specify the queuing mechanism, the option are: Strict Priority: Denoting a Strict scheduling will set the highest queue to be emptied first while the other queues will follow the weighted round-robin scheduling scheme. WRR: Use the weighted round-robin (WRR) algorithm to handle packets in an even distribution among priority classes. IEEE 802.1p Default Priority Settings From Port / To Port Specify a range of ports to be configured. Priority Defines the priority level for the corresponding port. The priority range is between 0 and 7 with 0 being assigned to the lowest priority and 7 assigned to the highest. Table 4.28 Click Apply to make the configurations take effect. QoS > Port Rate Limiting The Port Rate Limiting page allows users to configure the transfer speed limit for a selection of ports. Figure 4.45 - QoS > Port Rate Limiting 35