D-Link DGS-1100-08PV2 User Manual 1.00 WW - Page 27
L2 Features > FDB > Static FDB > Multicast Static FDB, L2 Features > FDB > MAC Address Table Settings
View all D-Link DGS-1100-08PV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
4 Configuration D-Link Smart Managed Switch User Manual L2 Features > FDB > Static FDB > Multicast Static FDB The Multicast Static FDB page allows user to view and configure the static multicast forwarding settings on the Switch. Figure 4.26 - L2 Features > FDB > Static FDB > Multicast Static FDB The fields that can be configured for Multicast Static FDB are described below: Item Description From Port / To Port Enter the appropriate port range used for the configuration. VID Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. MAC Address Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The format of the destination MAC address is 01-XX-XX-XX-XX-XX. Table 4.13 Click Apply to make the configurations take effect. Click Delete All to delete all the entries found in the display table. Click Delete to remove a specific entry. L2 Features > FDB > MAC Address Table Settings The MAC Address Table Settings page allows user to view and configure the MAC address table's global settings. Figure 4.27 - L2 Features > FDB > MAC Address Table Settings The fields that can be configured for MAC Address Learning are described below: Item Description From Port / To Port Enter the appropriate port range used for the configuration. State Use the drop-down menu to toggle between Enabled and Disabled. Default is Disabled. Table 4.14 Click Apply to make the configurations take effect. 24