D-Link DGS-1100-08PV2 User Manual 1.00 WW - Page 8
DGS-1100-08PV2, Front Panel
View all D-Link DGS-1100-08PV2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
1 Product Introduction D-Link Smart Managed Switch User Manual Power: Input for a 5V/1A AC adapter. Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10 seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds. When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode. Alternatively, you can press Reset to power up the device and enter loader mode. Kensington Lock: This is used to attach a physical Kensington security lock. GND: This is used to connect the Switch to ground. DGS-1100-08PV2 8-Port 10/100/1000Mbps PoE Smart Managed Switch. Front Panel Figure 1.7 - DGS-1100-08PV2 Front Panel Power LED: The Power LED lights up when the Switch is connected to a power source. Reset: Press the Reset button for 1 to 5 seconds to reboot the Switch. Press the Reset button for 6 to10 seconds to reset the Switch back to the default settings. The LED will light up solid amber for 2 seconds. When pressing the Reset button for longer than 10 seconds, the device will enter loader mode and the LED will light up solid green for 2 seconds. If the device cannot reboot, it will automatically enter loader mode. Alternatively, you can press Reset to power up the device and enter loader mode. Link/Act/Speed LED (Ports 1-8): Flashing: Indicates a network link through the corresponding port. Blinking: Indicates that the Switch is either sending or receiving data to the port. Green: Indicates that the port is running at 1000M. Amber: Indicates that the port is running at 10/100M. Light off: No link. PoE MAX. LED: Light up: Indicates the power output to PDs is over 57W. No additional PDs can be powered for safety consideration. Blinking: Indicates if the user unplugged certain PDs and made the PoE power budget left over 7W, the PoE MAX LED will blink 5 seconds. Light off: Indicates the power budget is using less than 57W. PoE LED (Ports 1-8): Green: Indicates the PoE powered device (PD) is connected and the port supplies power successfully. Red: The PoE port has failed, possibly due to: 1. PoE total power budget shortage. 2. Over current: Exceeds the power current of powered device's classification. 3. Short circuit: Short circuit has been performed on a powered device. Light off: Indicates no Powered Device (PD) connected. PoE Mode LED (Port 1-8): Solid Green: PD device insert and power feeding. Solid Amber: PD device insert but failure occurs. Light off: No PD device insert. 5