D-Link DGS-1520-28MP Product Manual 1 - Page 30
Switch Management, Management Options, Command Line Interface (CLI), Connecting to the Console Port
![]() |
View all D-Link DGS-1520-28MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
DGS-1520 Series Gigabit Ethernet Smart Managed Switch Hardware Installation Guide 5. Switch Management Management Options Command Line Interface (CLI) Web User Interface (Web UI) SNMP-based Management Management Options To configure, manage, and monitor the software features on the Switch, users can connect to the Command Line Interface (CLI), Web User Interface (Web UI), or through the means of third-party SNMP software. Command Line Interface (CLI) The CLI provides access to all of the software features available on the Switch. These features can be enabled, configured, disabled, or monitored by simply entering the appropriate command after the CLI prompt and pressing the Enter key. The Console port offers an Out-Of-Band (OOB) connection to the CLI and the LAN ports offers an in-band connection to the CLI using Telnet or SSH. NOTE: For more information about the CLI, refer to the DGS-1520 Series CLI Reference Guide. Connecting to the Console Port The Console port is used to connect to the CLI of the Switch. Connect the DB9 connector of the console cable (included in the packaging) to the Serial (COM) port of the computer. Connect the RJ45 connector of the console cable to the Console port on the Switch. To access the CLI through the Console port, Terminal Emulation Software must be used like PuTTY or Tera Term. The Switch uses a connection of 115200 bits per second with no flow control enabled. Figure 5-1 Console Connection Settings After the boot sequence completed, the CLI login screen is displayed. NOTE: The default username and password for the CLI and Web UI is admin. 25
![](/manual_guide/products/dlink-dgs152028-product-manual-5f79969/30.png)