D-Link DGS-3130 Quick Install Guide - Page 27
Side Panel Components, DGS-3130-54PS Switch, Front Panel Components, LED Indicators - d link 54ps
View all D-Link DGS-3130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
DGS-3130 Series Layer 3 Stackable Managed Switch Hardware Installation Guide Side Panel Components The side panels of this switch contain heat vents, fans, and rack-mounting screw holes. The heat vents are used to dissipate internal heat and facilitate internal air circulation. Do not block these openings. Leave at least 4 inches of space at the sides of the Switch for proper ventilation. Without proper heat dissipation and air circulation, system components might overheat which could lead to system failure or even severely damaged components. Figure 2-20 Side panels of the DGS-3130-54S DGS-3130-54PS Switch Front Panel Components The front panel of DGS-3130-54PS features a variety of LED indicators and ports. Figure 2-21 Front panel view of the DGS-3130-54PS Ports that can be found on the front panel of this switch are listed in the table below. Port Description 10/100/1000 Mbps RJ45 PoE The Switch is equipped with 48 RJ45 Ethernet ports. These ports can operate at 10 Ports Mbps, 100 Mbps, and 1 Gbps wire-speeds. These PoE ports are compliant to IEEE802.3af and IEEE802.3at. 10 Gigabit RJ45 Ports The Switch is equipped with 2 RJ45 Ethernet ports. These ports can operate at 1 Gbps and 10 Gbps wire-speeds. 10 Gigabit SFP+ Ports The Switch is equipped with 4 SFP+ ports. These ports can operate at 1 Gbps and 10 Gbps wire-speeds and support a wide collection of SFP+ transceivers. For a complete list of SFP/SFP+ transceivers that are compatible with this switch, refer to the SFP Ports and SFP+ Ports sections in Appendix A - Technical Specifications. LED Indicators Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, USB, Link/Act indicators for all the ports, and Stack ID. 27