D-Link DGS-3427 Product Manual - Page 165
Subnet VLAN Settings, VLAN Precedence Settings, Subnet VLAN Settings window
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Note: 1. If the IP address of the received untagged packet is match two entries in the table. The longest-prefix match order is used. 2. For make the subnet VLAN can work well, must add the ingress port into the VLAN member ports. 3. The subnet VLAN maybe affects the authorization protocol, such as 802.1x, WAC, JWAC, MAC access control and Compound authentication. Because the authorized port l will be assigned to target VLAN and set its PVID to target VLAN ID, if subnet VLAN takes effect, the ingress packets on this port maybe not are classified to target VLAN. Subnet VLAN Settings This window is used to add, modify or delete subnet VLAN entries To view this window, click L2 Features > VLAN > Subnet VLAN > Subnet VLAN Settings, as shown below. Figure 3 - 21 Subnet VLAN Settings window The following fields may be configured: Parameter Description Action VLAN Network Address Priority Use the pull-down menu to add, delete or find the subnet VLAN. Use the pull-down menu to select VLAN name or VID to enter in the field next to it. Use the pull-down menu to select IPv4 or IPv6 address to enter in the field next to it. Use the pull-down menu to select priority 0 to 7. Click the Apply button to implement the changes. Click View All to see all the entries. Click Delete All to remove all entries. VLAN Precedence Settings This window is used to configure VLAN classification precedence on each port. With VLAN classification precedence, you can specify the order of MAC-based VLAN classification and subnet VLAN classification. To view this window, click L2 Features > VLAN > Subnet VLAN > VLAN Precedence Settings, as shown below. 156