D-Link DGS-3427 Product Manual - Page 255
Access Rule Configuration window IP, Parameter, Description, Profile ID, Access ID 1
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 255 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 5 - 15 Access Rule Configuration window (IP) Configure the following Access Rule Configuration settings for IP: Parameter Description Profile ID Mode Access ID (1128) Type Priority (0-7) This is the identifier number for this profile set. Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access profile are not forwarded by the Switch and will be filtered. Select Mirror to specify that packets match the access profile are mirrored to a port defined in the Port Mirroring window. Port Mirroring must be enabled and a target port must be set. Type in a unique identifier number for this access. This value can be set from 1 to 128. Auto Assign - Checking this field will instruct the Switch to automatically assign an Access ID for the rule being created. Specifies the type of profile that is being created. This parameter is specified if you want to re-write the 802.1p default priority previously set in the Switch, which is used to determine the CoS queue to which packets are forwarded. Once this field is specified, packets accepted by the Switch that match this priority are forwarded to the CoS queue specified previously by the user. Replace priority with − Click the corresponding box if you want to re-write the 802.1p default priority of a packet to the value entered in the Priority field, which meets the criteria specified previously in this command, before forwarding it on to the specified CoS queue. Otherwise, a packet will have its incoming 802.1p user priority re-written to its original value before being 246