D-Link DGS-3427 Product Manual - Page 92
Filter DHCP Server Port Settings, Filter DHCP Server Port State Settings window
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch The following parameters may be configured: Parameter Description Trap/Log Enable this function to record logs and send traps when the Switch detects the illegal DHCP server packets. Illegal Server Log Suppress Duration The DHCP Server Screening function filters any illegal DHCP server packets. The DHCP server who sends the illegal packets will be logged. This command is used to suppress the logging of DHCP servers who continue to send illegal DHCP packets. The same illegal DHCP server IP address that is detected will be logged only once regardless of how many illegal packets are sent. The log can be suppressed by 1 minute, 5 minutes or 30 minutes. The default value is 5 minutes. Click Apply to implement the changes. Filter DHCP Server Port Settings This window is used to enable the settings for the Filter DHCP Server Port Settings. To view this window, click Administration > Filter DHCP Server > Filter DHCP Server Port Settings, as shown below. Figure 2 - 96 Filter DHCP Server Port State Settings window The following parameters may be configured: Parameter Description State Use the pull-down menu to enable or disable the Filter DHCP Server Port State Settings. 83