D-Link DGS-3427 Product Manual - Page 376
RX Error Analysis window table, Parameter, Description, Time Interval, Record Number
UPC - 790069283161
View all D-Link DGS-3427 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 7 - 15 RX Error Analysis window (table) The following fields can be set: Parameter Description Time Interval Select the desired setting between 1s and 60s, where "s" stands for seconds. The default value is one second. Record Number Select number of times the Switch will be polled between 20 and 200. The default value is 200. Crc Error Counts otherwise valid packets that did not end on a byte (octet) boundary. UnderSize The number of packets detected that are less than the minimum permitted packets size of 64 bytes and have a good CRC. Undersize packets usually indicate collision fragments, a normal network occurrence. OverSize Counts valid packets received that were longer than 1518 octets and less than the MAX_PKT_LEN. Internally, MAX_PKT_LEN is equal to 1536. Fragment The number of packets less than 64 bytes with either bad framing or an invalid CRC. These are normally the result of collisions. Jabber Counts invalid packets received that were longer than 1518 octets and less than the MAX_PKT_LEN. Internally, MAX_PKT_LEN is equal to 1536. DropPkts The number of packets that are dropped by this port since the last Switch reboot. SymbolErr Counts the number of packets received that have errors received in the symbol on the physical labor. BufFullDr Incremented for each packet that is discarded while buffer full. ACLDr MultiDr Incremented for each packet that is discarded while buffer full. Incremented for each multicast packet that is discarded. 367